Product Description
The FRP U-Shaped Drainage Ditch Mold uses good FRP material. So it is light, strong, and tough. It does not bend or break easy. It fights corrosion and aging. So the mold works in wet ground, acid/alkali soil, sewage, and outdoor weather. Demolding is easy. So cast U-shaped ditches come out with smooth surfaces and flat inner walls. So water flows well with low resistance. No leaks happen. You can use the mold 60 or more times. So you do not need to change it often. It works for different ditch widths and depths. So sizes can be changed as you need. This mold replaces old concrete molds. So it cuts down weight during construction.
Product Parameters
|
Parameter |
Specification |
|
Standard length |
1000 – 2000 mm |
|
U-shaped opening width |
200 – 600 mm |
|
Ditch depth |
150 – 400 mm |
|
Mold wall thickness |
6 – 12 mm |
|
Material |
Unsaturated polyester + fiberglass |
|
Density |
1.8 – 2.0 g/cm³ |
|
Tensile strength |
≥85 MPa |
|
Flexural strength |
≥130 MPa |
|
Working temperature |
-30 – 80°C |
|
Demolding time |
≤24 hours |
|
Casting pressure resistance |
≥0.35 MPa |
|
Concrete grade |
C15 – C30 |
|
Inner wall roughness |
Ra ≤0.8 μm |
Product Advantages
It is much lighter than concrete molds. So it is easier to carry on site.
01
It needs fewer changes over time. So you save money on buying new molds.
02
It has smoother inner walls. So water flows better and loses less energy.
03
It works in corrosive places. Concrete molds would break down fast there.
04
Main Applications
This FRP U-Shaped Drainage Ditch Mold is used by ditch makers, city companies, farm water teams, and factory builders. It works for road side drains, garden drains, farm irrigation ditches, factory sewage and storm drains, and school or park drains. It makes city U-shaped drains, farm U-shaped irrigation ditches, and factory anti-corrosion U-shaped drains. This mold is also called a fiberglass U-shaped trench mould.
Frequently Asked Questions (FAQ)
Q: How many times can I use the mold before it needs to be replaced?
A: With good cleaning and storage, you get 60 to 100 uses. After that, the inner surface may show some wear. But many users keep using it past 100 uses. They just need a little more time to demold.
Q: Can I use the same mold to make different U-shaped sizes?
A: No. The U-shape width and depth are set by the mold shape. So you need a different mold for different sizes. Tell us your target width and depth when you order.
Hot Tags: FRP u-shaped drainage ditch mold, China FRP u-shaped drainage ditch mold manufacturers, suppliers, factory, FRP Drainage Ditch Cover Mold, Fiberglass pipe mould, Fiberglass cable duct mould, fiberglass trench cover mould, FRP Tank Mold, FRP Process Pipe Mould
