Product Description
The FRP Inspection Well Mold is made for casting FRP inspection wells. It uses high-strength FRP material. So it fights corrosion, aging, and impact. It handles wet underground conditions, acid/alkali soil, and municipal sewage. The mold has a precise shape and tight joints. So no slurry leaks out. Demolding is easy. Cast wells come out with smooth surfaces, good integrity, and tight sealing. No leaks happen. You can reuse the mold 70+ times. It works for round and square wells. You can also customize the opening diameter and body height. This mold replaces old concrete molds. So it cuts production time.
Product Parameters
|
Parameter |
Specification |
|
Opening diameter |
600 – 1000 mm |
|
Well body height |
1000 – 3000 mm |
|
Well body diameter |
800 – 1500 mm |
|
Mold wall thickness |
8 – 15 mm |
|
Material |
Epoxy resin + fiberglass |
|
Density |
1.9 – 2.1 g/cm³ |
|
Tensile strength |
≥90 MPa |
|
Flexural strength |
≥130 MPa |
|
Working temperature |
-40 – 80°C |
|
Demolding time |
≤36 hours |
|
Casting pressure resistance |
≥0.4 MPa |
|
Joint gap |
≤0.3 mm |
|
Concrete grade |
C20 – C30 |
Product Advantages
Tight joints prevent slurry leaks, so you waste less material.
01
Smooth surfaces mean less post-casting repair work.
02
One mold works for round or square shapes, saving you tooling costs.
03
In high-volume production, this mold lasts 3–4 times longer than concrete molds.
04
Main Applications
Inspection well manufacturers use this FRP Inspection Well Mold. It's for municipal drainage, residential sewage, industrial park pipelines, and rural sewage networks. You can produce sewage wells, stormwater wells, power cable wells, and communication wells. Typical users include municipal engineering companies, pipeline installation crews, and environmental equipment factories. You might also hear it called a fiberglass inspection well mould or fiberglass manhole mould.
Frequently Asked Questions (FAQ)
Q: How many cycles before the mold needs replacement?
A: With proper cleaning and storage, expect 70–120 cycles. After that, joint edges may show minor wear. Many users continue beyond 120 with slightly longer demolding time.
Q: Can the same mold produce both round and square wells?
A: No. Round and square wells need different mold shapes. Tell us your well shape when ordering.
Hot Tags: FRP inspection well mold, China FRP inspection well mold manufacturers, suppliers, factory, FRP Drainage Ditch Cover Mold, Fiberglass pipe mould, Fiberglass cable duct mould, fiberglass trench cover mould, FRP Tank Mold, FRP Process Pipe Mould
