Product Description
The frp pipe braiding and pultrusion equipment uses an integrated design. Braiding and pultrusion run together in one automated line. Braiding precision is high - yarns lay down evenly. Pultrusion forming is stable, giving good product consistency. Braiding angle and pultrusion speed can be adjusted to suit different product specs. The machine runs smoothly with low noise, low energy use, easy operation, and low maintenance cost.
Product Parameters
|
Parameter |
Specification |
|
Pulling force |
10 – 50 t |
|
Pulling speed |
0.1 – 1.5 m/min |
|
Clamping force |
5 – 30 t (adjustable) |
|
Heating zones |
3 – 8 zones |
|
Temperature range |
0 – 300°C |
|
Motor power |
3.7 – 37 kW |
|
Machine size (L×W×H) |
9–30m × 1.2–2m × 1.5–2.2m |
|
Air pressure |
0.4 – 0.8 MPa |
|
Control |
PLC (customizable) |
|
Braiding angle |
15° – 85° |
|
Pultrusion speed range |
0.5 – 5 m/min |
|
Yarn count |
32 – 128 ends |
|
Braiding motor power |
5.5 – 15 kW |
Main Applications
This FRP pipe braiding and pultrusion equipment is used for producing FRP and carbon fiber composites. It makes pipes, profiles, and rods for the construction, chemical, power, rail transit, and aerospace industries. You might also hear it called a fiberglass pipe braiding and pultrusion machine , or pultrusion and braiding equipment for FRP pipes.
Frequently Asked Questions (FAQ)
Q: Can the same machine produce both round pipes and square profiles?
A: Yes. The forming die and pulling section can be swapped. The braiding head works the same for different shapes. Changeover takes about 1–2 hours.
Q: How precise is the braiding angle control?
A: The machine uses servo-driven braiding heads with encoder feedback. Angle stays within ±1° of the set value across the whole run.
Hot Tags: FRP pipe braiding and pultrusion equipment, China FRP pipe braiding and pultrusion equipment manufacturers, suppliers, factory
